Contact Us
TEL: +86-573-87788269
Fax: +86-573-87781315
E-mail: info@cy-solar.com
Address: No.18, Gaozhu Road, Hongyou Village, Yanguan Town, Haining City, Zhejiang Province, China
Home > News > Content
How To Replace The Iron Core Grounding Piece Effectively
Aug 12, 2018

How To Replace The Iron Core Grounding Piece Effectively

August 12, 2018


1. The transformer iron core on the two fastening screw and iron core yoke up and down fastening steel tension belt loosen.

2. Use iron flat shovel (or woodworking to cut the blade), the original iron chip grounding piece plug part of the iron core paint to eradicate 1cmx10cm.

3. Use a flat shovel to remove the iron core paint part from the top to pry open a seam, deep about 5cm, eradicate paint slag.

4. Will produce good copper belt, width about 3cm~4cm, stab into the iron core gap, pay attention to the depth of more than 4cm.

5. The iron core yoke fastening screw, steel pull belt to tighten, pay attention to the steel belt and iron core insulation.

6. Paint the top of the iron core, after the dry paint to measure iron core and ground insulation resistance should be greater than 50mω.

7. Connect the iron core grounding piece with the clamping piece and finish.


If you have interested in our rackings sytem just pls contact me with vicky@cy-solar.com