[[ImgSrc-search]]
Contact Us
TEL: +86-573-87788269
Fax: +86-573-87781315
E-mail: info@cy-solar.com
Address: No.18, Gaozhu Road, Hongyou Village, Yanguan Town, Haining City, Zhejiang Province, China
Home > News > Content
Installation Instructions And Installation Methods Of Solar Panels
Sep 10, 2018

The function of solar panels is to convert the sun's light into electrical energy, and then output direct current into the battery. Solar panels are one of the most important components in solar power generation system. The conversion rate and service life of solar panels are important factors to determine whether the solar cells are of use value. Such

Module design According to the International Electrotechnical Commission GB/T9535-98 and IEC 61215 standards, the battery is designed to meet the requirements of GBT6495 standards, using 36 or 72 polysilicon solar cells in series to form 12V and 24V modules of various types. The module can be applied to various household photovoltaic systems, stand-alone photovoltaic power stations and grid connected photovoltaic power stations. Such

Features of raw materials Battery: High efficiency (more than 15.5) polysilicon (more than 16.5 monocrystalline silicon) solar panel packaging to ensure adequate power generation solar panels. Glass: Low iron tempered velvet glass, also known as white glass, the thickness of 3.2 mm in the solar cell spectral response of the wavelength range 320-1100 nm transmittance of more than 91, for more than 1200 nm infrared light has a higher reflectance. This glass can also withstand the radiation of the sun's ultraviolet rays, and the transmittance does not decrease. EVA: A high quality EVA film with a thickness of 0.78 mm with anti-ultraviolet agent, antioxidant and curing agent was used as the sealing agent of solar cells and the linking agent with glass and TPT. It has high transmittance and anti-aging ability.

Open the cover of the junction box_Insert the M4 screwdriver into the mounting hole on the cover of the junction box according to the sign on the junction box, lift one foot gently, so that the top four corners of the edge are lifted first, and then the cover of the box can be opened. There are wiring protective covers in the box, and three terminals can be seen when it is brought up. Battery wiring There is a sign of positive and negative electrodes beside the left and right terminals. It represents the positive and negative electrodes of the output voltage of the battery in the working state. The positive electrodes are connected with the negative electrodes according to the demand of electricity. _wiring adopts mechanical compression mode, using M4 cross screwdriver to unscrew the compression screw of the terminal post, peeling the wire and passing through the sealing joint of G7 cable, inserting the wire into the junction hole, and pressing the wire tightly. After the wire is connected, the protective cover is put on, the self-tapping screw is screwed into the screw hole with the M4 cross screwdriver, and the connection of the battery plate is completed after the wire is fixed on the cover of the junction box. Grounding of battery plate Installing grounding screw on the back of battery plate, fixing the grounding wire on the grounding screw, the grounding can be safely grounded.

Haining Chuangyuan Solar Energy Technology Co., Ltd

Add: No.18, Gaozhu Road, Hongyou Village, Yanguan Town, Haining City, Zhejiang Province, China

Contact us: Jane Zhang

Tel: +86-573-87788269

Fax: +86-573-87781315

Mobile: +86-18267383175

E-mail: info@cy-solar.com